{
  "id": "h7-led-headlight-bulbs",
  "sku": "h7-led-headlight-bulbs",
  "title": "H7 LED Headlight Bulbs (2 Pack, Off-Road Use)",
  "slug": "h7-led-headlight-bulbs",
  "price": 64.99,
  "currency": "EUR",
  "availability": "in_stock",
  "category": "headlights",
  "category_label": "Headlights",
  "tags": [],
  "colors": [],
  "materials": [],
  "dimensions": null,
  "weight": null,
  "images": [
    "https://mycar.irish/dropship-images/headlights/h7-led-headlight-bulbs/main-h7-led-headlight-bulbs.jpg"
  ],
  "description_short": "Sold for off-road, show and private property use. A matched pair of 12 volt, 6000K H7 LED bulbs in a straightforward conversion kit, sold for use away from public roads in housings designed for halogen bulbs.",
  "description": "The problem most people are actually trying to solve\n\nSomeone looks at the front of their car, or their track hack, or the project that lives under a sheet in the garage, and the headlights look tired. Old halogen bulbs throw a warm, slightly yellow light that reads as dated next to the cool white you see on newer cars. The temptation is simple enough. Swap the bulb, get the modern look, move on with your weekend.\n\nThat is the appeal of an H7 LED conversion kit. It is one of the cheapest, fastest cosmetic changes available on a car, and it does not involve cutting into anything. You pull the old bulb, you fit the new one, and the colour of the light at the front of the vehicle changes.\n\nBut there is a catch that honest sellers should put at the top rather than the bottom, so here it is. In Ireland, fitting LED bulbs into headlight units that were designed and built for halogen bulbs is generally not permitted on public roads. That is why this pair is sold for off-road, show and private property use. If your plan involves the public road, this is not the product for that plan.\n\nWhat you are actually buying\n\nTwo H7 LED bulbs. 12 volts. 6000K colour temperature. That is the whole specification, and we would rather state it plainly than pad it out.\n\nThe H7 fitting is a single-filament type used widely across the industry. It locates in the holder and clips in place, so there is no splicing and no modification of the original wiring. That is what makes the swap approachable for someone who is not a mechanic.\n\nThe 6000K figure is about colour, not quantity. Kelvin is a scale that describes the tone of light. Lower numbers look warm and yellow, higher numbers look cool and white. 6000K sits in the cool white range, which is exactly the look most people are chasing when they search for the best h7 led headlight bulbs for a project.\n\nWe are not publishing output figures, lifespan hours or wattage for this set.\n\nWhy the pack comes as a pair\n\nBuy one bulb and you end up with a car that looks like it is squinting. One side warm, one side cool white. It is the single most obvious giveaway of a half-finished job, and it looks worse in photos than it does in person, which matters if the vehicle is for show.\n\nChanging both at the same time also means both bulbs have the same history. They were made together, they have been used for the same number of hours, and they will behave the same way. That is why a twin pack is the standard way to buy a conversion set, and why we sell it that way here.\n\nThe electronics question, answered honestly\n\nThis is where most LED conversions go sideways, and it is worth understanding before you order rather than after.\n\nMany modern vehicles keep an eye on their own headlight circuits. They measure the current flowing through each one and compare it against what a halogen bulb should draw. An LED bulb does not draw the same way. Depending on how the car is programmed, it can read that difference as a fault.\n\nTwo things typically happen. You get a bulb failure warning on the dashboard, even though the bulb is working perfectly. Or you get flicker, where the light pulses instead of holding steady. Neither means the bulb is broken.\n\nThe usual answer is a CANbus decoder, a small module that sits in line and gives the vehicle's electronics the reading they expect. A decoder is not included in this pack. If you know your vehicle monitors its lighting, plan for one. If you do not know, fit the bulbs and see what happens before you spend more.\n\nOlder vehicles with simpler electrics often have no problem at all. There is no reliable way to predict it from the outside, which is why we say it plainly rather than pretending the issue does not exist.\n\nWho this set suits\n\nProject builds are the obvious one. If a car is being put back together over months and spends its time on private land or in a workshop, an H7 LED bulb set is a cheap way to finish the front end.\n\nShow vehicles are the second. The cool white look photographs well under cover and at night events, and consistency between the two sides is easy to achieve with a matched pair.\n\nTrack and off-road vehicles that never see public tarmac make up a good part of the rest. Yard machines, private estate vehicles and anything that works on enclosed land fall into the same group.\n\nWho it does not suit is just as important. If the vehicle is your daily driver on public roads and the headlight housing was built for halogen bulbs, this is not the right purchase, no matter how tempting the look is.\n\nChecking the fit before you buy\n\nFitment here is by fitting type only. We can tell you these are H7 bulbs on a 12 volt system. We cannot tell you they will clear the back of your specific headlight, because that varies enormously.\n\nTake the dust cap off and have a look at what is behind the bulb. Note how much room there is between the back of the holder and whatever sits behind it, whether that is a suspension turret, the air box or the inner wing. Some bulbs need a hand's width of clearance, some need less. If the space is tight, measure it rather than guessing.\n\nCheck the dust cap itself too. Some caps have plenty of depth and some are shallow. If the cap will not sit back on properly, you have a problem that is easier to spot now than after everything is reassembled.\n\nFinally, confirm the fitting. Plenty of people search for the best h7 led bulb pair when their car actually runs H4, H11 or HB3. The owner's handbook will tell you, or the old bulb will have the type stamped on the metal base.\n\nFitting and handling\n\nFor most cars this is a short job. Switch everything off, let the lights cool, remove the dust cap, release the retaining clip, pull the old bulb and fit the new one.\n\nHandle the bulb by its base. Keep your fingers off the lens and the LED chips, and wear clean gloves if you have them. Make sure the bulb seats fully and the clip engages properly, because a bulb that is not square in the holder will not sit as intended.\n\nDo one side first and test it. If you see a warning light or flicker, you have learned something useful before you have both sides apart.\n\nLooking after them\n\nThere is not much to it. Keep the lens clean with a dry, soft cloth and leave the solvents and polishes alone. Only clean a bulb that is cold and disconnected.\n\nIf you store a spare, keep it in its box, dry, and away from heat. Bulbs that rattle loose in a toolbox get knocked about and the connections suffer.\n\nCheck the dust cap seal from time to time. Moisture getting into a headlight housing causes more trouble than almost anything else, and a cap that has not been properly reseated after a bulb change is a common cause.\n\nThe short version\n\nThis is a pair of H7 LED bulbs, 12 volts, 6000K cool white. They fit an H7 holder without cutting or splicing, and they come as two so both sides of the vehicle match.\n\nThey are sold for off-road, show and private property use, because in Ireland fitting LED bulbs into headlights built for halogen bulbs is generally not permitted on public roads. Some vehicles will show a bulb warning or flicker and may need a CANbus decoder, which is not in the box.\n\nCheck your fitting, check your clearance, and know where the vehicle is going to be used. Get those three right and this is a simple, inexpensive upgrade for the right project.",
  "llm_summary": "A pack of two H7 LED headlight bulbs for 12 volt vehicle electrical systems, with a 6000K cool white light colour. The bulbs use the standard H7 fitting, so they locate in an H7 holder without cutting or splicing the original wiring. These are LED conversion bulbs. In Ireland, fitting LED bulbs into headlight units designed for halogen bulbs is generally not permitted on public roads, so this set is sold for off-road, show and private property use. Some vehicles may display a bulb warning or show flicker when LED bulbs are fitted, and may require a CANbus decoder, which is not included. Sold for off-road, show and private property use only; not for public roads in headlights designed for halogen bulbs.",
  "returnable": true,
  "return_policy": "Most online purchases may be cancelled within 14 days after the goods are received under the Consumer Rights Act 2022, followed by 14 days to return them. This shop also publishes a 15 day change-of-mind policy. Faulty or misdescribed goods are repaired, replaced or refunded as required by Irish consumer law.",
  "shipping_profile": "standard",
  "warranty": null,
  "brand": "Online Auto Company",
  "gtin": null,
  "mpn": null,
  "condition": "new",
  "url": "https://mycar.irish/h7-led-headlight-bulbs/",
  "canonical_url": "https://mycar.irish/h7-led-headlight-bulbs/",
  "json_url": "https://mycar.irish/api/products/h7-led-headlight-bulbs.json",
  "updated_at": "2026-11-11",
  "compare_at_price": 77.99
}